1. Spray or pour a small amount onto screen.
2. Wipe screen clean with shop towel(s).
3. Repeat on back of screen image.
4. Wipe both sides of screen with degreaser or damp shop towel.
5. Allow screen to dry thoroughly.
Note: If tape does not stick, wipe again with damp shop towel and allow to dry.
Screen Opener Directions:
|Good for Use With: Plastisol, nylon, UV, vinyl, lacquer, epoxy, enamel, and ceramic inks.
pH Level: 7.75
VOC (Volatile Organic Compounds): <1%, .026 lb/g, 3.1 g/l