QCM PERMA White - PERMA-170
QCM PERMA White - PERMA-170

QCM PERMA White - PERMA-170

Regular price
$60.00
Regular price
Sale price
$60.00
Unit price
per 
Availability
Sold out

PERM-170 Perma-White was specifically formulated to combat the ever-present bleed problem experienced by those who print on polyester and polyester blended materials. Perma-White exhibits a unique blend of printability, opacity and bleed resistance. The cured finish is a smooth, matte surface. Perma-White has excellent mat characteristics. Perma-White contains bleaching agents to neutralize dye migration.

Directions for Use:

Printing: Screen mesh in the 60-110 TPI (23-43 TPcm) range are recommended for best opacity. Higher mesh counts can be used but bleed may result. Screens of 25 n/cm or higher are strongly recommended. Use enough squeegee pressure to deposit the ink on the surface of the shirt, try not to drive the ink into the fabric. A 70 durometer squeegee is recommended. This enhances opacity and helps ensure a good cure

Stencil: Use any direct emulsion or capillary film.

Modifiers: Perma-White is ready to use. Modification is not necessary unless you are trying to achieve a special effect or use. Any extenders or modifiers will affect opacity. For general printing of 50/50Ís, try Polar White (XOLB-165) or XOLB-151.

Flashing: Depending on your flash unit, "Glacier White" will flash in 3 seconds, (10 watts per sq. in/heating area) or 4-5 seconds (6-7 watts per sq. in. /heating area).

Cleanup: Use any of the commercially available products for the cleanup of plastisol inks.

Environmentally Friendly: QCM Plastisol Ink contains no leaded pigments and, when properly disposed of, has no environmental impact. Use a screen wash for plastisols for cleanup. Scrape screens carefully and store ink for reuse. Minimize unusable scrap ink by segregating ink by color.

SDS Info Sheet