QCM XOLB Ink Colours
QCM XOLB Ink Colours

QCM XOLB Ink Colours

Regular price
$51.78
Regular price
Sale price
$51.78
Unit price
per 
Availability
Sold out

XOLB, "Xtra Opaque, Low Bleed" Inks are high opacity multi-purpose inks that are designed to produce extreme opaque prints, yet are very easy to print on a manual press. The smooth, creamy consistency leaves an even uniform print on white flash bases and can be opaque on black without a white base with screens as fine as 160 TPI (62 TPcm) mesh. XOLB inks are fast flashing, cure with a non-tack surface, and contain clean bright pigments.

Instructions:

Printing: XOLB inks print well through screen meshes in the range of 83-305 TPI (32-120 TPcm). Screens stretched to a minimum of 25 newtons are recommended. If using lower tension screens, adjust off contact accordingly. Use just enough squeegee pressure to deposit the ink on the surface of the shirt. This will enhance the opacity and also ensure a better cure. Try not to drive the ink into the fabric. A 70 durometer sharp squeegee is recommended.

Stencil: Use any direct emulsion or capillary film. Flashing: Parameters vary between all flash units. Flash for 2-3 seconds with the ink deposit reaching 150-250°F (65-121°C). Ink should be dry and without tack.
Warning: Over flashing can cure the ink and prevent adhesion between coats of ink.
Cleanup: Use any of the commercially available products for the cleanup of plastisol inks.
Environmentally Friendly: Use any of the commercially available products for the cleanup of plastisol inks. Environmentally Friendly: QCM Plastisol Ink contains no leaded pigments and, when properly disposed of, has no environmental impact. Use a screen wash for plastisols for cleanup. Scrape screens carefully and store ink for reuse. Minimize unusable scrap ink by segregating ink by color. QCM PPR-901 Black pigment can be used to convert old ink into black ink for waste elimination.

 

Product Overview:

Brand:
QCM Inks
Fusion Temperature:
325°F
Product Code:
GL9010
Performance:
Industry:
Inks
After Flash Tack:
Decreases with increased mesh
Application:
Screen Printing
Squeegee:
Category:
Specialty Inks
Profile:
Square
Chemistry:
Plastisol
Type:
Polyurethane
Substrate(s):
Cotton
Angle:
10° - 20°
Best Used By:
12 months
Storage:
Certification(s):
ISO9001
Storage Temperature:
65°F - 95°F (18°C - 35°C)
Curing:
Storage Notes:
Store in a cool and dry environment. Keep container tightly closed to prevent from drying and/or contamination.

 

MSDS Info Sheets